Wilson Cellular 40dB In-Vehicle Wireless Dual-Band 800MHz/1900MHz Cellular/PCS Bi-Directional Amplifier Kit - 801212

This kit contains both the Wilson Cellular 801201 Vehicle Repeater as well as the 301103 Magnetic Mount Antenna - everything you need. Wilson Cellular In-Vehicle Amplifiers extend cellular services in poor coverage areas by amplifying both transmit and receive signals. The amplifier reduces problems with signal fades and dropped calls while improving voice quality, service range and access. Wilson Cellular amplifiers are network-compatible and enhance the cellular phone user's satisfaction without compromising the operation of the cellular system. Features: Passes TIA/EIA-98-E Transmit test for evaluation CDMA Cellular Phones Power Control Logic ensures maximum output power is within Cellular Standards Allows multiple phones to be used simultaneously Allows cellular phone to operate properly with all types of modulations including CDMA Maximum 3 Watts output power Designed for all cellular systems: AMPS, CDMA, EDGE, GPRS, GSM and TDMA (not compatible with N-E-X-T-E-L/I-den) Automatic Gain Control Overload Protection Circuit - Protects cell system from overload Automatic Reset - if overload occurs FCC Type Accepted What are the benefits of Wilson Cellular Wireless Mobile Amplifiers? The Wilson Cellular Wireless Amplifiers allow one or more users to benefit from an outside antenna and amplifier without a physical connection to the cell phone. This eliminates the need for an external antenna connection on the cell phone. Installation Options: Option A: The inside antenna (interior low profile antenna) should be mounted 1 foot or less from where the phone is to be used. The best place to mount the inside antenna is shoulder height on the side of the drivers seat. The closer the inside antenna is placed to the phone, the better the performance. Do not mount the interior antenna within 4" of metal. Option B: For convenience, the small mini antenna (359914) can be directly attached to the phone and will perform similar to an 811201 - Dual Band Direct Connect Amplifier. The mini antenna must be connected directly to the