This Metal, Floppy-drive Adapter Bracket From Startech.com Is for Installing 3.5

Overall Rating: ( 3 reviews )

1. Posted: 12-17-2008

   one piece, 100% plastic, no metal parts. in my case it does it's job after little "adjustment". but it moves under pressure. :-
   -739869255704138043

2. Posted: 11-14-2008

   The bracket does what I want it to do, which is to hold a floppy in a 5 1/2" drive opening. Mine is hidden behind another cover so no big deal but the bracket is NOT metal. It is plastic.

3. ( 2 of 2 found this review helpful ) Posted: 05-06-2007

   I purchased two of these to hold OK306 and OK307 disk interface panels from [...]. These adapters have only 3 holes per side for mounting a 3.5 inch drive. The holes work perfectly for a 3.5 inch diskette drive but not much else. Most modern cases that I have used have slots or a lot of holes on each side. Many 3.5 inch panels or other non-diskette-drive options use these non-standard hole patterns. The OK306 and OK307 use non-standard hole patterns. As a result, these adapters were completely useless for the 3.5 inch panels I purchased to use in them but they would work perfectly for a 3.5 inch diskette drive. So, if you want these to put a 3.5 inch diskette drive in a 5.25 inch slot, you're in luck. If you need the adapters for anything else, you better compare the hole pattern on the panel to the hole pattern on a standard 3.5 inch diskette drive before ordering.

See all reviews...