



( 117 reviews )
-




Posted: Aug 17 2009
I bought this wall mount to use with my new 42 inch LG HDTV. It took all of one hour, from opening the box, to finally hanging the TV on the wall. The instructions were not very detailed but we were able to figure them out. The construction is solid and I have not had any problems with it since installation. It has been a great space saver, as the TV is in a smaller room with space at a premium.
-




Posted: Aug 11 2009
Just installed 2 Sanus VMPL50 mounts on a 52" Samsung and a 46" Sony. All the hardware needed was supplied with the system. You get a huge assortment of screws. The Sony's screws fit perfectly. On the 52" Samsung, I needed to add 4 washers at the head of the screws so it would go into the back of the unit at the right depth. Otherwise, installation was a snap. Make sure you catch at least 2 studs and make sure you are in the center of the stud since the lag bolts are quite large. The tilt feature makes it easier to manipulate the wires behind the TV. Can't beat the price from Amazon. Good luck with your installation!
-




Posted: Aug 5 2009
Very simple to install mount that comes with all hardware for sheet rock walls with studs as well as concrete or cinder block walls. You will need to provide your own drill bits and wrench though. I used it to install a LN52A850 52" LCD TV Instructions aren't great but anyone with half a brain can figure this out. I would recommend using a level because in my apartment the walls are not very straight so measure from the ceiling or floor was not a good option. The whole hanging process took me roughly 1 hour, including measuring and drilling. The mount itself is fairly heavy and feels very sturdy. As i mentioned before all hardware is included. If you have a lot of cables use the spacers provided with the hardware to bring the tv approximately an extra inch off the wall. This mount is fairly low profile so if your cables stick out of the back of the tv and not from the side the tilting down will be obstructed, but that's not a flaw of the mount as they do include the aforementioned spacers. Mount is easily moved left to right and tilted up and down using 2 fingers, I do recommend this product
















