MagWedge Full-Size Port-Powered Swipe Reader (Tracks 1 & 2, with PS/1 & 2 Cable)

The Mag-Wedge Reader connects in-line between a PC and its keyboard. It is intended to remain virtually invisible to both the keyboard and the PC until a card is read. When a card is read, the Mag-Wedge Reader takes over the interface to the PC and sends card data using the same scan codes used by the keyboard. The PC cannot distinguish between data from the keyboard and data from the Reader. This reader is made for use with PS/2 keyboards.The Mag-Wedge Reader also supports the operation of an optional encrypting PINPad that can be programmed for encrypting or non-encrypting operation. Commands are passed from the PC to the PINPad, and data from the PINpad to the PC.Power is supplied to the Reader by the PC. The Mag-Wedge standard Reader sends card data, including start sentinel and end sentinel, followed by a carriage return. Units are available which do not send a carriage return or the start and end sentinel.The Mag-Wedge Reader also recognizes commands from the PC to enable or disable the PINPad, the keyboard, or the card reading. When powered up, all devices will be active. The Reader also initializes the optional PINPad to the non-encrypting mode.