Furman HR-6 Personal Headphone Mixer

Furman HR-6 Remote Mixer is a compact 6-channel, 5-pot mixer that clamps to any microphone stand and is designed to be used with the HDS-6 Audio Distribution System. (Note: The Furman HDS-6, which is sold separately, is ideal as a low-distortion headphone driver for the most critical listening situations. In addition to providing high current differential buffered signals, it also provides power and ground to the HR-6 remote mixers.) When used with the HDS-6, the HR-6 allows musicians to customize their own headphone or monitor mix, so the engineer never has to touch the board. The HR-6 provides 4 mono pots and 1 stereo pot. The 4 mono pots allow each user to create a custom mix of 4 console channels or busses. The stereo pot will most often be used for a main control room mix, or for a stereo effects return. The HR-6 also provides a "Submixes Included/Excluded" button, which mutes the four mono pots, allowing only the stereo source to be heard, without having to alter the HR-6's four monaural settings. The HDS-6 / HR-6 Audio Distribution System and HR-6 Remote Mixer are designed for high-end audio applications, yet are affordable enough for home studios and general live sound applications. Features: Every performer in a studio or live sound setting can have a personalized mix without any adjustments at the board Perfect for use as a headphone system in the studio HDS-6 rackmount audio distribution system connects to the mixer/console to provide interface and power supplies to drive a group of HR-6 remote mixers HR-6 remote mixer provides each musician with five volume controls: four monaural (for mixer channels or busses), plus one for an overall stereo mix or a stereo effects return HDS-6 to HR-6 linking cables are included with the HR-6, as is a universal microphone stand clamp HDS-6 provides gain trims and overload LEDs for each input, ground lift and on/off switch, and system status LEDs