( 17 reviews )
-
Posted: Jun 16 2009
Cordless DECT 6.0 Stainless-Steel-Finish Handset for use with GE 27909 Series Telephones Had a little problem understanding install specs. But once under stood it was real easy to connect. Every unit (bought 3 units)works very well.
-
Posted: May 28 2009
While I have no complaints with the primary handset/base-station, this secondary handset/base-station is very flawed. The catch between the base and handset is designed in such a way that the angle at which you mount the handset to the base has to be perfect or the handset will not catch onto the base and will fall down. Compounding the problem is the fact that the base is a light flimsy piece of plastic that, if not secured to a wall, will likely be just pushed around on the table surface when attempting to mount the handset. It is extremely frustrating to say the least.
-
Posted: Apr 27 2009
Only purchased because it compliments the main phone. This has to be the hardest electronics setup I every went through. Don't bother with help from GE, they contracted it out to the Philippines and the guy was only reading the same instructions I had. I went through programming this phone 10 times before I finally got it right. The procedures were always the same, the only thing I figured out that made the difference was that you have to hold the phone very close to the base station and do not get your hand in between them. Works well after you get it set up. Battery goes in before you plug it in the AC adaptor. Pulling battery and reinstall is needed to reset.
